Specifications
Print Method
Dye Sublimation / Resin thermal transfer
Resolution
300 dpi (11.8 dots/mm) continuous tone
Colors
Up to 16.7 million / 256 shades per pixel
Print Ribbon Options
Wide array of ECO-friendly, high-capacity print ribbons from K to YMCKOKO. Laminate patch options from full card coverage and half panel polyester overlaminates to off-the-shelf and fully custom holographic overlaminates are all available from HID. Available print ribbons include:- Full-color with resin black and overlay panel, YMCKO*, 500 prints- Full-color with two resin black panels and overlay panel, YMCKOK*, 500 prints- Full-color with two resin black panels, YMCKK*, 500 prints- Full-color half-panel with resin black and overlay panel, YMCKO*, 850 prints- Full-color half-panel with two resin black panels and overlay panel, YMCKOK*, 650 prints- Full-color half-panel with two resin black panels and overlay panels, YMCKOKO*, 500 prints- Resin black, K*, 3000 prints
Print Speed**
6 seconds per card (K*); 16 seconds per card (YMCKO*); 24 seconds per card (YMCKOK*)
Accepted Standard Card Sizes
CR-80 (3.375 L x 2.125 W / 85.6 mm L x 54 mm W); CR-79 (3.313" L x 2.063" W / 84.1 mm L x 52.4 mm W)
Print Area
CR-80 edge-to-edge (3.36 L x 2.11 W / 85.3 mm L x 53.7 mm W); CR-79 (3.3" L x 2.04" W / 83.8 mm L x 51.8 mm W)
Accepted Card Thickness
.009 - .040 / 9 mil - 40 mil / .229 mm - 1.016 mm
Accepted Card Types
PVC or polyester cards with polished PVC finish; monochrome resin required for 100% polyester cards; optical memory cards with PVC finish; rewrite
Input Hopper Card Capacity
100 cards (.030 / .762 mm)
Output Hopper Card Capacity
Up to 100 cards. (.030" / .762 mm)
Card Cleaning
Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change
Software Drivers
Windows® 7, 8, 8.1 and 10 (32 bit & 64 bit) / Windows Server 2003, 2008, 2012
Interface
USB 2.0, Standard Ethernet with internal print server (Note: Ethernet optional on BIS-Certified Units)
Operating Temperature
65 to 80 F / 18 to 27 C
Humidity
2080% non-condensing
Dimensions
Printer: 9.8" H x 18.7" W x 9.2" D / 249 mm H x 475 mm W x 234 mm D
Printer + lam: 18.9" H x 18.7" W x 9.2" D / 480 mm H x 475 mm W x 234 mm D
Weight
Printer: 11 lbs / 5 Kg
Printer + lam: 20 lbs / 9.1 Kg
Agency Listings
Safety: UL 60950-2, CSA C22.2 (60950-07), and CE; EMC: FCC Class A, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KC
Supply Voltage
100-240Vac, 50-60Hz, 1.6 Amps max
Supply Frequency
50 Hz / 60 Hz
Environmental Features
GreenCircle® Certified card printer (base models only without encoders), refillable supply cartridges (ECO), and rewrite technology - no ribbon required
Warranty
Printer three years; printhead three years, unlimited pass with UltraCard®
Encoding Options (HID Encoders)
Supported smart card and magnetic stripe technologies: 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard / SE / SR / Seos®, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3
Options
Single wire Ethernet and USB 2.0 interface for inline printing and encoding are only optional on BIS-Certified Units (note: single wire Ethernet encoding is only available for iCLASS® , MIFARE®, and contact smart card encoding) - Ethernet-enabled printer supports wireless accessory; dual-sided printing module; smart card encoding modules (contact/contactless); magnetic stripe encoding module; printer cleaning kit; secure proprietary consumables system
Software
Swift ID™ embedded badging application, FARGO Workbench™ diagnostic utility with Color Assist™ spot-color matching
Display
Color changing status buttons
ADDITIONAL PRODUCT FEATURES
Custom watermark overlay and resin scramble data protection; Password-protected printer operation and AES data encryption; High-capacity ribbon consumables, Resin threshold; Built-in Ethernet and USB connection for centralized or remote ID card issuance. (Note: Ethernet optional on BIS-certified units)